Homeowners often have to face issues in their house, which are usually common. In most of the situations, the issue is due to their own carelessness. Whether accidental hazards occur in your home naturally or artificially, you have to repair the damages as soon as possible to avoid further loss. Basements are one of those places that require frequent maintenance due to water flooding, etc. Thus, instead of panicking, you need to analyze the complete situation and act accordingly to curb the flooding problems in your basement. In this post, you will learn some tips to perform when your basement has flooded with water.
Shut off The Power:
Your initial step should be that you shut down all power supply in the basement area. This should not only include electricity, but also gas. Beware that you never move through a flooded basement while the power is still active. You may not know that there is electricity flowing through the flooded water on the surface that may give you an electric shock. If you are unable to locate or reach the power circuit to turn it off, then you may need to contact an electrician to do it for you.
Wear Protective Gear:
No matter what the source of water is, you should never move through the flood without any gear to protect your body. Wear gloves and boots so that your skin does not meet the water directly. In addition, you can also wear a mask, as it can get smelly because of the clogging. Also, be careful while you walk through the place, as it can be quite slippery down there. You can also read a post that will guide you to measure toilet rough in dimensions.
Examine The Source of Water Leakage:
Now that you are prepared to enter the place, it is time inspect the area to find the source of water flooding. If it is a leaking pipe, then shut off the water supply with its respective valve. You can also check if the downspouts are clogged. If that is the case, then clean it using a relevant tool so that the water moves out of the basement.
Using A Pump To Take Out The Water:
There is a chance that the water drains out on its own once you seal away the source of leakage. However, if the water still stays there, then it is prudent that you use a dry/wet vacuum pump to take out all the water from the basement. You may need to use a different kind of pump depending upon the amount of water present in the basement room. Once enough water has been removed, you can use a mop to remove the remaining water and debris lying on the floor.
Remove All Damaged Goods Out:
Your next step will be to take out all the items that were damaged by the flooded water. You may have to keep them out in the open under the sun so that they dry out. Meanwhile, you may need to keep the basement room empty for at least the next two days so that it dries too. This step is important so that there is no risk of molding. After two days, check the room properly and decide your next course of action.
Hope these steps give you an idea of how to deal with flooded basements.
